Supply, Delivery and Installation of Both Fabricated and Medical Equipment for 3 Ambulances

• Country: Uganda
• Summary: Supply, Delivery and Installation of Both Fabricated and Medical Equipment for 3 Ambulances
• UGT Ref No: 57194319
• Deadline: 04 Oct 2021
• Financier: Other Funding Agencies
• Purchaser Ownership: -
• Tender Value: Refer Document
• Notice Type: Tender
• Document Ref. No.: UGA180371T-10035
• Purchaser's Detail:

Purchaser : ENABEL, L-AGENCE BELGE DE DÉVELOPPEMENT
Lower Kololo Terrace, Plot 1B PO BOX 40131 Kampala Tel +256 414 23 05 43

• Description:
• Tenders are invited for Supply, Delivery and Installation of Both Fabricated and Medical Equipment for 3 Ambulances 1000/2000W Inverter The converter must be able to use normal up to 240V electrical devices in Car. Please note this inverter must be connected to a 12V battery. LCD Multifunction Display: 1.Battery mode 2. Battery voltage: digital display 3. Battery level indicator 4. Voltage display: output voltage of the inverter 5.Output waveform (sine wave) 6. Show watts Low Battery Alarm (nominal): 9.5 - 11.0V Low Battery Shutdown Point (nominal): 9.0 - 10.5V High Battery Shutdown Point (nominal): 14.5 - 15.5V Protection Properties: Soft start function, High temperature protection, High voltage protection Low voltage protection, Short circuit protection, AC Overload protection Overcurrent protection, Dimensions 9.3 x 12.4 x 4.7 inches or better. Condition: A brand-new, unused, unopened, undamaged item in its original packaging. Power: 1000W/2000W, Output Waveform: Pure Sine Wave, Output Frequency (Nominal): 60 Hz or better. Efficiency: 90% Or better, Operating Temp: -4°F - 158°F System Configuration: Off-Grid, No Load Current Draw: 1a power source: automobile battery, continuous power: 1000w, surge power: 2000w wire gauge: 4 awg. ac output voltage range: 115vac/240vac, operators manual, and applicable certifications. no. 3 2 "siren, communication and beacon lights beacon lights no. 3 led light bar 55w with siren and dual speaker in built 200w 6 pcs 1.5w led-12 strobe light on front 6 pcs 1.5w led-12 strobe light on rear 2 pcs 23w halogen directional light on lane pc dome coating working voltage dc 12v, power 200w, working current 4.5a, fuse 20a, protection level ip65, lamp shade hardness 4h, more than 90% transparency, colour red, blue, amber, clear, green. ambient temp: 20-55 degrees c, weight: 12-17kg, dimensions: lxwxh: 1120x405x265mm • sound: siren with wail, yelp and phaser tones or better. • red and blue flashes or better. internal radio communication: between driver and patient attendant 3 "220v sockets 2 way, 2 gang, to be fixed inside the patient compartment. standard grounding wall socket rated current: 10a ip rating: ip68 2 gang voltage: 240v color: white panel material: high quality pc inside material: high quality brass and pc" no. 6 4 "patient cabin round led lights 15w ultra-thin led spot light. material: aluminium working voltage: 12 v dc light size: 68 x 68 x 55 mm this can vary due to design installation hole: hole cut φ2.25-2.5inchs (57-63mm) this can vary due to design led chips: 15 pieces or better color: warn white 3000k cable length: 200 cm (78.74 inches) weight: 10.58 oz. (300g) this can vary due to design wire length: 78.74 inches(2 m)" no. 6 5 "rear ac independent system a universal 12v air conditioner hvac system control module panel to be fixed on the vehicle's main ac system, no. 3 with a 36 pass 4 way or better configuration" 6 "oxygen regulator, (under normal temperature and pressure), adoptable to cylinder and flowmeter/flow gauge with maximum capacity of at least 15 l/min " no. 6 7 "flow meter wall mounts, 200kg/cm2 pressure, input pressure: 15mpa/20mpa output pressure: 0.2-0.3mpa automatic discharge pressure of the safety valve: 0.35+_0.05mpa the range of flow: 1-15l/min connection thread: g5/8/cga540/w21.8/g3/4 main body: brass humidifier bottle: 200ml unit colors: white/green/blue are available structure: piston type packing: 10pcs/ctn (color box) dimension: 52x44x18cm or better must depend on provided regulator." no. 6 8 "flow meter outlet these are wall sockets/ plugs for adoption of oxygen flow meter. accepts gas specific adapters, approved 100% pressure testing of each outlet and cleaned for medical gas service must be indexed to eliminate interchangeability of gas services up to 1″ (25 mm) wall thickness adjustment 360-degree swivel inlet pipe for easy installation universal rough-in assembly to accept quick disconnects or diss front adaptors (can be interchanged at any time) must depend on provided regulator/flow meter." no. 6 9 "medical examination/diagnostic light. light beam shall be adjustable and able to widen and narrow with the push/pull of the stem. must feature an adjustable gooseneck to point light to where you need it most nickel finish with gold/silver/chromium trim on light head " no. 3 10 "stretcher bed platform (to allow proper patient and scoop loading), 203x570x120mm made of high-strength aluminium alloy material. the extension board, no. 3 must be designed to be rolling-over. it adapts to the ambulance chassis height. the base will be locked automatically when the stretcher is moved into it. the base using new fixing device in the front and back adopts the double layer design. must allow scoop stretcher to be deposited in the bottom." 11 "seat belt cutter/life hammer emergency tool/screen breaker, 173x66mm with double ended break hammer. seat belt cutter, and plastic or mettalic handle. holding bracket with192x75mm." no. 3 12 "courtesy light/spotlight for patient loading lighting. ac120-240vac or 12v/24vdc, with 100-110lm/w lumen, frequency: 50hz/60hz dimensions Φ235*260mm or better, with 10°30°60°120° beam angle." no. 3 13 "grill ambulance led flasher lights. type: led strobe light size: 4x3 or better spec led qty: 6pcs voltage: dc12v optional beam: spot/flood no. 6 14 pneumatic connections as per fixed oxygen cylinders ws. 3
• Documents:

 Tender Notice